Rockwell-automation 20-COMM-M Modbus/TCP Adapter Bedienungsanleitung PDF herunterladen (Seite 67)

Viewing the Adapter’s Web Pages 6-7

20-COMM-M Modbus/TCP Adapter User Manual

Publication 20COMM-UM014C-EN-P

Figure 6.5 Example of Selected Faults Configuration Page

C. Click the desired fault/alarm check boxes, and click Save Changes.

D. Click the “Back to E-mail Configuration Page” link.

2. Type the following information in their respective boxes:

If the IP address of the e-mail server is unknown, you can contact your

IT department or use the DOS window to enter a command to find its IP

address:

A. On the Windows task bar, click Start > Run to display the Run

window.

B. In the Run window Open field, type “cmd” and click OK to display

the DOS window.

C. On the c:\ > command line, type “nslookup [name of e-mail

server].” The entry “c:\ > nslookup smtp.company.com” is an

example.

D. Press ENTER to display the e-mail server IP address (see

Figure 6.6

Information Description

“IP address of…” Type in the address of the mail server that will be used to

deliver the e-mail messages. (When the IP address is

unknown, see the information following this table.)

“E-mail addresses to notify…” Type in addresses to where you want e-mail messages to be

sent. Multiple addresses can be used, but they must be

separated by commas (comma delimited).

“Subject of e-mail message…” Type in the desired subject text for the e-mail message.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 97 98

Keine Kommentare

Rockwell-automation 20-COMM-M Modbus/TCP Adapter Bedienungsanleitung Seite 67