Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Bedienungsanleitung PDF herunterladen (Seite 85)

Publication 1760-UM002B-EN-P - March 2005

Commissioning 3-7

From the First Contact to the Output Coil

With Pico GFX-70, you work from the input to the output. The first input

contact is

I01.

1. Press OK.

Pico GFX-70 proposes the first contact

I01 at the cursor position.

I flashes and can be changed, for example, to a P for a push button

input using the up/down arrows keys. However, nothing needs to be

changed at this point.

2. Press OK twice, to move the cursor across the

01 to the second contact

field.

You could also move the cursor to the next contact field using the left

arrow button.

3. Press OK.

Again, Pico GFX-70 inserts a contact

I 01 at the cursor position.

Change the contact number to

I 02, so that break contact S2 can be

connected to input terminal I2.

4. Press OK so that the cursor jumps to the next position and use the

up/down arrow keys to change the number to

02.

5. Press OK to move the cursor to the third contact field.

You do not need a third relay contact, so you can now wire the contacts

directly up to the coil field.

I 01

L: 1 C:1 B:7944

I 01 ❚

L: 1 C:1 B:7944

I 01 I 02

L: 1 C:2 B:7944

TIP

You can press DEL to delete a contact at the

cursor position.

-I 02 Â

L: 1 C:3 B:7944

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 399 400

Kommentare zu diesen Handbüchern

Keine Kommentare