Rockwell-automation SB3000 Configuration and Programming Bedienungsanleitung PDF herunterladen (Seite 16)

2-6

SB3000 Drive Configuration and Programming

2.2.2 PMI Meter Port Selection

PMI Meter ports 1 and 2 are dedicated to driving two standard meters supplied with

the SB3000 Rectifier. Meter port 1 drives the DC bus output current meter. Meter port

2 drives the AC input current meter. Meter ports 3 and 4 are not used on standard

SB3000 systems, but can be programmed to operate custom display meters. See

figure 2.2.

A DC bus voltmeter is hardwired directly to the SB3000 DC bus output terminals.

Figure 2.2 – PMI Meter Port Selection Screen

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 121 122

Keine Kommentare

Rockwell-automation SB3000 Configuration and Programming Bedienungsanleitung Seite 16