Rockwell-automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Bedienungsanleitung Seite 103
- Seite / 168
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
DeviceNet Adapter Parameters
B-11
Mask that is used for the Logic Command word when it is received
through peer input. If the mask bit is 0 (Off), the command bit is
ignored and not used. If the mask bit is 1 (On), the command bit is
checked and used.
Important: If the adapter receives a Logic Command from both a
master device and a peer device, each command bit
must have only one source. the source of command bits
set to “0” will be the Master device. The source of
command bits set to “1” will be the peer device.
Scale of the Reference received from a peer.
Important: Changes to this parameter take effect immediately. A
drive receiving its Reference from peer I/O will receive
the newly scaled Reference, resulting in a change of
speed.
32 Peer Cmd Mask
Range:
0 = Ignore bit
1 = Use bit
Default:
0000 0000 0000 0000
Type:
Read/Write
Reset Required:
No
33 Peer Ref Adjust
Range:
0.00% to 199.99%
Default:
0.00%
Type:
Read/Write
Reset Required:
No
- DeviceNet Adapter 1
- DPI AC Drives 1
- Contents 3
- List of Figures 7
- List of Tables 9
- Introduction 11
- 1.2 Related Documentation 12
- Electric 13
- Getting Started 15
- 2.2 Required Equipment 16
- 2.3 Installation Checklist 17
- Step Action Refer to 18
- Installing the 19
- 3.5 Applying Power 23
- Configuring the 25
- SP600 Standard 31
- 4.5 Setting the Data Rate 32
- Peer-to-Peer 33
- 4.9 Setting a Fault Action 41
- 4.10 Resetting the Adapter 43
- 00010xxx 45
- 01234567 45
- 1=Enabled 45
- 0=Disabled 45
- Configuring the Scanner 47
- AC Drive 48
- Edit I/O 49
- Parameters 49
- 5.4) appears 49
- 5.3.1 Mapping the Input I/O 52
- 5.3.2 Mapping the Output I/O 53
- 5.4 Saving the Configuration 54
- Using I/O Messaging 55
- 6.4 Using Reference/Feedback 58
- 6.5 Using Datalinks 58
- Using Explicit 67
- Messaging 67
- ControlLogix Controller 68
- Using Explicit Messaging 69
- PLC or SLC Controller 70
- Word Description 71
- 7.4 Running Explicit Messages 73
- 7.5 ControlLogix Example 74
- 7.6 PLC-5 Example 76
- Ladder Logic Program 77
- 7.7 SLC Example 78
- Troubleshooting the 81
- and Network 81
- 8.1.1 DRIVE Status Indicator 82
- 8.1.2 MS Status Indicator 83
- 8.1.3 NET A Status Indicator 84
- 8.2 Adapter Diagnostic Items 85
- Technical 91
- Specifications 91
- 1DPI Port 94
- 2 DPI Data Rate 94
- 3 DN Addr Cfg 94
- 4 DN Addr Actual 94
- 5 DN Rate Cfg 95
- 6 DN Rate Actual 95
- 7 Ref/Fdbk Size 95
- 8 Datalink Size 95
- 9 Reset Module 96
- 10 Comm Flt Action 96
- 11 Idle Flt Action 97
- 12 DN Active Cfg 97
- 13 DPI I/O Config 98
- 14 DPI I/O Active 98
- 15 Flt Cfg Logic 99
- 16 Flt Cfg Ref 99
- Figure B.3 – M-S Input (25) 100
- 26 M-S Output 101
- 27 COS Status Mask 101
- 28 COS Fdbk Change 101
- 29 COS/Cyc Interval 102
- Peer A Input 102
- Peer B Input 102
- 32 Peer Cmd Mask 103
- 33 Peer Ref Adjust 103
- 34 Peer Flt Action 104
- 35 Peer Node to Inp 104
- 36 Peer Inp Timeout 105
- 37 Peer Inp Enable 105
- 38 Peer Inp Status 105
- 43 Peer Out Skip 107
- DeviceNet 109
- C.1 Identity Object 110
- Services 111
- C.2 Connection Object 112
- C.3 Register Object 114
- Instance Attributes 115
- C.4 Parameter Object 116
- C.5 Parameter Group Object 119
- C.6 PCCC Object 121
- C.7 DPI Device Object 123
- C.8 DPI Parameter Object 127
- DeviceNet Objects 129
- Descriptor Attributes 130
- Decimal Places 131
- Decimal Place) 131
- C.9 DPI Fault Object 137
- C.10 DPI Alarm Object 140
- C.11 DPI Time Object 142
- Logic Command/ 145
- Status Words 145
- Logic Status Word 146
- Logic Command/Status Words 147
- Master-Slave 149
- I/O Configuration 149
- Datalinks 152
- Datalinks (Continued) 153
- Datalinks (Continued) 155
- Datalinks 156
- Glossary-1 157
- Glossary-2 158
- Glossary-3 159
- Glossary-4 160
- Glossary-5 161
- Glossary-6 162
Verwandte Produkte und Handbücher für Ausrüstung Rockwell-automation RECOMM-DNET DeviceNet Adapter for use with DPI AC
Ausrüstung Rockwell-automation RECOMM-485 RS485 DFI Communications Module Bedienungsanleitung
(68 Seiten)
(68 Seiten)
Ausrüstung Rockwell-automation FactoryTalk Historian SE 3.0 H2H Interface Install Bedienungsanleitung
(32 Seiten)
(32 Seiten)
Ausrüstung Rockwell-automation 20D PowerFlex 700S/700H Frame 10...14 Drives Maint Bedienungsanleitung
(10 Seiten)
(10 Seiten)
Ausrüstung Rockwell-automation T8292 Trusted Power Distribution Unit MCB 24V Bedienungsanleitung
(2 Seiten)
(2 Seiten)
Ausrüstung Rockwell-automation 1440-SPD02-01RB XM-220 Dual Speed Module Bedienungsanleitung
(12 Seiten)
(12 Seiten)
Ausrüstung Rockwell-automation MD60 Door-Mount NEMA 1 OIM Bezel Kit MDI Bedienungsanleitung
(6 Seiten)
(6 Seiten)
Ausrüstung Rockwell-automation Logix5000 Control Systems: Connect POINT I/O Modul Bedienungsanleitung
(62 Seiten)
(62 Seiten)
Ausrüstung Rockwell-automation 1203-USB USB Converter (Same as DRIVES-UM001) Out Bedienungsanleitung
(76 Seiten)
(76 Seiten)
Ausrüstung Rockwell-automation SP200 AC Drive, 1 2 Channel Analog, Preset Speed Bedienungsanleitung
(68 Seiten)
(68 Seiten)
Ausrüstung Rockwell-automation 440N Magnetically Operated Safety Switch Bedienungsanleitung
(4 Seiten)
(4 Seiten)
Ausrüstung Rockwell-automation T8017 Trusted Peer to Peer Communications Bedienungsanleitung
(46 Seiten)
(46 Seiten)
Ausrüstung Rockwell-automation GV3000/SE Operator Interface Module (OIM) User Gui Bedienungsanleitung
(112 Seiten)
(112 Seiten)
Ausrüstung Rockwell-automation FlexPak/WebPak 3000 DC Drive AutoMax Network Commu Bedienungsanleitung
(108 Seiten)
(108 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern