Rockwell-automation 8520-9API 9/Series OCI API Developer's Guide Bedienungsanleitung PDF herunterladen (Seite 118)

5–7OCI Data Server CNC Commands

Publication 8520-6.6 - August 1999

TRANSFER_HOMECAL_TO_PORTB (no argument)

Use this command to send the current home calibration data to a

printer or other device connected to the control’s port B

. This will

print the home calibration data currently in RAM. This may or may

not be the same home calibration data stored in the control’s flash

memory.

For example:

[TRANSFER_HOMECAL_TO_PORTB]

prints the home calibration data to the device connected to the

control’s port B. You can only use this command to output home

calibration data to a printer.

Important: This command does not apply to the 9/PC CNC.

TRANSFER_REVERSAL_ERROR_TO_PORTA (no argument)

Use this command to send the current reversal error data to a printer

or other device connected to the control’s port A

. This will print the

reversal error compensation data currently in RAM. This may or

may not be the same data stored in the control’s flash memory.

For example:

[TRANSFER_REVERSAL_ERROR_TO_PORTA]

prints the reversal error data to the device connected to the control’s

port A. You can only use this command to output reversal error data

to a printer.

Important: This command does not apply to the 9/PC CNC.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 262 263

Keine Kommentare

Rockwell-automation 8520-9API 9/Series OCI API Developer's Guide Bedienungsanleitung Seite 118