Rockwell-automation 842E EtherNet/IP Absolute Encoder User Manual Bedienungsanleitung PDF herunterladen (Seite 62)

54 Rockwell Automation Publication 842E-UM001A-EN-P May 2012

Appendix B RSLogix 5000 sample code

Set up the Configuration tab as follows.

1. Set Parameter Scaling to Enable.

2. Set Counts per Revolution to 200.

3. Total Measuring Range will be 51,200.

4. Position the slide/encoder to a known start position.

5. Set the preset value. The preset value will be retained by the encoder

through a machine cycle.

Setting up your project

1. Create a new program file. Select the processor revision and name the

project file. In this example the CompactLogix 1769-L35E V20 was used.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Keine Kommentare

Rockwell-automation 842E EtherNet/IP Absolute Encoder User Manual Bedienungsanleitung Seite 62