Rockwell-automation 1756-CFM ControlLogix Configurable Flowmeter Modul Bedienungsanleitung PDF herunterladen (Seite 107)

107Rockwell Automation Publication 1756-UM010B-EN-P - December 2011

Configuring the Configurable Flowmeter Module 107

5. Use ladder logic and a message instructions to send the new

configuration to your CFM module, see page 89

I.Status[0].ProverTotal Float REAL Corrected/compensated volume received on

Channel 0 during prover cycle.

Prover total resets when the ProverEnable

transitions from 0-1.

Prover total concurrently accumulates with

net volume, and must be saved if subtracted

from the NetVolume for single and multiple

prover verifications.

I.Ch0AccelerationAlarm Decimal BOOL Displays whether acceleration alarm was

set on channel 0

0 = alarm was not set

1 = alarm was set

I.Ch0OverspeedAlarm Decimal BOOL Displays whether overspeed alarm was set

on channel 0

0 = alarm was not set

1 = alarm was set

I.Ch0OverrangeAlarm Decimal BOOL Displays whether overrange alarm was set

on channel 0

0 = alarm was not set

1 = alarm was set

I.Ch0OverflowAlarm Decimal BOOL Displays whether overflow alarm was set on

channel 0

0 = alarm was not set

1 = alarm was set

Table 8 - Tag Changes Required for Totalizer Mode Using Prover Function

Name Style Data type Definition Enter this

Value

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 167 168

Keine Kommentare

Rockwell-automation 1756-CFM ControlLogix Configurable Flowmeter Modul Bedienungsanleitung Seite 107