Rockwell Automation 1203-SSS Bedienungsanleitung PDF herunterladen (Seite 19)

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

Chapter 2

Installing the Converter

This chapter provides instructions for installing and removing the

1203-USB converter.

Connecting the Cables

Important:The converter must not be installed in an area where the

ambient atmosphere contains volatile or corrosive gas, vapors

or dust. If the converter is not going to be installed for a period

of time, it must be stored in an area where it will not be exposed

to a corrosive atmosphere.

Only two of the three supplied cables are required to install the 1203-USB

converter between the drive and computer.

For a list of compatible products, see Compatible Products

on page 1-3.

Topic Page

Connecting the Cables

2-1

Installing Connected Components Workbench Software 2-12

Installing the USB Drivers 2-4

Powering Up the Converter 2-12

Removing the Converter 2-13

TIP: Always use the USB cable to connect the converter to the computer.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 111 112

Keine Kommentare

Rockwell Automation 1203-SSS Bedienungsanleitung Seite 19