Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Bedienungsanleitung PDF herunterladen (Seite 20)

20 Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012

Chapter 1 Prepare the PowerFlex 40 Drive Hardware

6. Tighten the screws.

Connect the Drive to the

DeviceNet Network

1. Connect the 1799-DNC5MMS

5-pin linear to micro male adapter

to the female end of the 1485K-

P1F5-R5 KwikLink right-angle

micro male to micro female

connector cable.

2. Connect the cable to the

DeviceNet connector on the drive.

3. Connect the drive to the

DeviceNet network.

4. Apply power to the drive.

0.5…0.6 Nm

(4…5 lb-in)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Keine Kommentare

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Bedienungsanleitung Seite 20