
Rockwell Automation Publication 440G-UM001A-EN-P — November 2013 15
Installation and Wiring Chapter 3
Setting the Actuator
Direction of Approach
The actuator can approach the switch from all four directions.
Ensure the white arrow on the actuator aligns with the white arrow on
the switch body.
The actuator must be fitted to the actuator mounting bracket in such a
manner that the white alignment triangles marked on both the actuator
and switch body are in the installed position.
Ensure the locking bolt enters the actuator mounting bracket first.
Align the white triangles.
0.4 Nm
2 x T10 Torx screws
Kommentare zu diesen Handbüchern