Rockwell-automation 2707-NP DTAM Programming Software Bedienungsanleitung PDF herunterladen (Seite 57)

A–B

Chapter

7–1

Creating Data Display Screens

This chapter describes how to create data display screens.

Section Page

Data Displays 7–1

Scaling 7–1

Data Display Screen Builder 7–2

Inserting Display Data 7–3

Display Register Format Selections 7–5

Data display screens allow you to monitor the value of registers in the SLC

or PLC. The DTAM continuously reads the registers to update (at a user-

defined rate) the displayed values.

This is how a data display screen may appear:

Tank Level = 33 Gallons

10% Full Press NEXT

To construct data display screens, you need to specify:

• The type of screen as data display

• The type of data stored in the PLC or SLC register

• The register to access (address)

• Any data format and display information

• The display position for the data

• Any additional text information that you want to display

Data in controller data files can be scaled to standard engineering units such

as gallons, pounds, feet, etc. Data is scaled by setting up a proportion

between the controller register data limits and the DTAM data display limits.

Refer to the description of scaling in Chapter 3.

Note: The 32 bit BCD data format cannot be scaled.

Chapter Objectives

Data Displays

Scaling

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 183 184

Keine Kommentare

Rockwell-automation 2707-NP DTAM Programming Software Bedienungsanleitung Seite 57