Rockwell-automation 1793-IB4S FLEX INTEGRA 4 INPUT MODULE Bedienungsanleitung PDF herunterladen (Seite 4)

4 FLEX Integra 4 Input Module

Publication 1793-5.1 - September 1999

Wiring

This module is available with 2 styles of terminations: 1793-IB4 -

screw-cage and 1793-IB4S - spring-clamp. Refer to the wiring figure

below.

1. Connect individual sensor signal input leads to terminals 2 through 5

on row A (channels 0 thru 3 respectively).

2. Connect sensor supply lead to +24V dc (terminals 1, 6, 9, or 14).

(Terminals 1, 6, 8, 9, 14 and 15 are connected internally to +24V dc.)

3. For 3-wire sensors only: Connect associated common to terminals 10

through 13 on row B.

4. Connect +24V dc voltage to terminal 8 on row B.

5. Connect 24V dc common to terminal 0 on row A.

6. If daisy-chaining + voltage from this module to the next Integra

module, connect a jumper from terminal 15 to terminal 8 on the next

FLEX Integra module.

7. If daisy-chaining 24V dc common from this module to the next FLEX

Integra module, connect a jumper from terminal 7 on this module to

terminal 0 on the next Integra module.

ATTENTION: Total current draw through the module’s

(+) voltage terminals is limited to 10A. Separate power

connections to the module may be required.

01234 567

8 9 10 11

13 14 1512

41378

CVI I I I CV

CCVVCCVV

Ch 0

Ch 1

Ch 2

Ch 3

0 1234567

8 9 10 11 12 13 14 15

41379

CV I I I I CV

CCVVCCVV

Ch 0

Ch 1

Ch 2

Ch 3

1793-IB4 1793-IB4S

Where: C = common, V = +24V dc power, I = input

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Rockwell-automation 1793-IB4S FLEX INTEGRA 4 INPUT MODULE Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Rockwell-automation 1793-IB4S FLEX INTEGRA 4 INPUT MODULE