Rockwell-automation 1792-OB8PLP INSTL INSTR 8 OUTPUT MODULE Bedienungsanleitung PDF herunterladen (Seite 5)

ArmorBlock-LP 8 Output Module 5

Publication

1792-5.7 – December 1997

Connect the Wiring to the ArmorBlock Module

This module uses quick disconnect, screw-on style connectors for:

• I/O output wiring

• the DeviceNet connector

• the output power connector

30197–M

5-pin DeviceNet Mini-connector

Output Power

3-pin Mini-connector

Eight

5-pin Output Micro-connectors

OUT OUT

Seven micro caps are included with your module. Use these caps to

cover and seal unused ports. Pinout diagrams for the connectors are

shown below.

ATTENTION: Make sure all connectors are securely

tightened to properly seal the connections against leaks and

maintain IP67 requirements.

Connecting the Output Wiring

Connect output wiring to the micro-connectors which screw into mating

connectors on the front of the block.

I/O Output Micro-Connector

Pin 1 = No connection

Pin 2 = Not used

Pin 3 = Negative/Return

Pin 4 = Signal A

(View into socket)

Pin 5 = Ground

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Rockwell-automation 1792-OB8PLP INSTL INSTR 8 OUTPUT MODULE Bedienungsanleitung Seite 5