Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Bedienungsanleitung PDF herunterladen (Seite 131)

Publication 1761-UM006E-EN-P - August 2005

BOOTP Configuration Method (default) B-3

Using the Rockwell

BOOTP/DHCP Utility

The Rockwell BOOTP/DHCP utility is a standalone program that

incorporates the functionality of standard BOOTP software with a

user-friendly graphical interface. It is located in the Utils directory on

the RSLogix 5000 installation CD. It can also be downloaded from

www.ab.com/networks/bootp/index.html web page. The device

must have BOOTP enabled (factory default) to use the utility.

To configure your device using the BOOTP utility, perform the

following steps:

1. Run the BOOTP software. In the BOOTP Request History

panel you will see the hardware addresses of devices issuing

BOOTP requests.

2. Double-click on the hardware address of the device you want to

configure. You will see the New Entry pop-up window with the

device's Ethernet Address (MAC).

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 143 144

Keine Kommentare

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Bedienungsanleitung Seite 131