Rockwell-automation 1609-ENET Ethernet Network Card Quick Start Bedienungsanleitung PDF herunterladen (Seite 19)

Rockwell Automation Publication 1609-QS002A-EN-P - May 2014 19

Ethernet Mode Setup Chapter 2

6. Go to the "Controller Scope Tags" and identify your UPS ENET card input/output/configuration tags. Change the

"XXXX:C.Data[0].0" tag from 0 to 1. Note: XXXX is a unique name given to the UPS ENET card. ENET_Card

was the name given in this example, therefore the full tag name is "ENET_Card:C.Data[0].0"

7. Reset the card by pressing the black circle button on the card. Wait approximately 45 seconds until communications

are established. You should have an "IO OK" and the yellow triangle in the module should be gone.



1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Keine Kommentare

Rockwell-automation 1609-ENET Ethernet Network Card Quick Start Bedienungsanleitung Seite 19