Rockwell-automation Logix5000 Control Systems: Connect a PowerFlex 70 Bedienungsanleitung PDF herunterladen (Seite 15)

Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012 15

Prepare the PowerFlex 70 Drive Hardware Chapter 1

Mount the Drive

For the purpose of this quick start, the PowerFlex 70 drive can be propped in a safe and

convenient location.

For complete mounting instructions, see the PowerFlex 70 Drive User Manual, publication

20A-UM001

Wire Power to the Drive

1. Loosen the screw and remove

the cover.

2. Verify that a jumper is installed

between I/O terminals 7 and 8.

3. If there is no jumper between I/O

terminals 7 and 8, install one

before proceeding.

WARNING: Verify that all incoming power is turned off before wiring power.

Do not apply incoming power before connecting the DeviceNet adapter to the drive.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Keine Kommentare

Rockwell-automation Logix5000 Control Systems: Connect a PowerFlex 70 Bedienungsanleitung Seite 15