Rockwell-automation 8520 9/PC CNC Tool Path Graphics Programming Manua Bedienungsanleitung PDF herunterladen (Seite 13)

9/PC CNC Tool Path Graphics Programming Manual 13

Publication 8520-PM097A-EN-P - September 2001

3D Vertical Plane Rotation (beta) Angle

This angle rotates the 3-dimensional coordinate system around the configured horizontal axis.

The allowed value ranges from -359.99999 to + 359.99999. Make sure you select 3D as your

visualization type to set this parameter.

Figure 3

3-D Horizontal Plane Rotation Angle

TIP

Consider the “right-hand rule” to determine the rotation

direction of the axis. If you wrap your right hand around

the third axis with your thumb pointing in the positive

direction along the axis, a positive rotation around this

axis is the same direction in which your fingers are

pointing. See Figure 3 for a visual example.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Rockwell-automation 8520 9/PC CNC Tool Path Graphics Programming Manua Bedienungsanleitung Seite 13