Rockwell-automation 6181F_P Series E Integrated Display Computers User Bedienungsanleitung PDF herunterladen (Seite 48)

48 Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014

Chapter 4 Component Replacement

PCI Riser Board Options

You can use the PCI expansion slot kit, catalog number 6189V-EXTPCIS, to

change the default one-slot PCI riser board to the following:

• Two-slot PCI riser board

• One-slot PCI Express riser board

• Two-slot riser board with one PCI slot and one PCI Express x1 slot

Follow these steps to install the PCI expansion slot kit

(the performance

computer is shown)

1. Follow the steps for Pre-configuration

on page 36.

2. Remove the computer cover as detailed in Remove the Cover

on page 37.

3. Loosen the three screws that secure the PCI riser board bracket (A).

4. Remove the PCI riser board assembly from the chassis (B).

5. Remove the two screws that secure the default riser board (C).

6. Remove the riser board from its bracket (D).

7. Place the default riser board with its screw on a static-dissipating work

surface or inside an antistatic bag.

SHOCK HAZARD: Electrostatic discharge (ESD) can damage the computer and

components. Read and follow Electrostatic Discharge Precautions

on page 36

before removing the rear cover.

Failure to follow proper safety precautions can result in severe electrical shock or

damage to the computer.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Keine Kommentare

Rockwell-automation 6181F_P Series E Integrated Display Computers User Bedienungsanleitung Seite 48