Rockwell-automation 284E ArmorStart EtherNet IP Communications and Con Bedienungsanleitung PDF herunterladen (Seite 59)

Rockwell Automation Publication 280E-PM001A-EN-P – August 2011 59

ArmorStart

EtherNet/IP

™

Communications & Control Programming Manual Chapter 5

k. Parameter 140 sets the rate of deceleration for all speed decreases by

setting the deceleration time in seconds. Set parameter 140 to 25

seconds.

8. Click the Set button to apply the parameters. If the Set button is not

pushed then the parameter values will revert back to the previously set

values when you exit the Properties menu.

9. Attempt to enter a parameter value that is outside the allowed range by

setting parameter 131 to 600. The following warning screen should appear.

Click OK to clear this screen and return to the Parameters menu to set the

parameter within the allowed range.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 89 90

Keine Kommentare

Rockwell-automation 284E ArmorStart EtherNet IP Communications and Con Bedienungsanleitung Seite 59