Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Bedienungsanleitung PDF herunterladen (Seite 11)

Getting Started 1-3

The adapter is compatible with Allen-Bradley PowerFlex 4-Class

(Component-Class) drives and other products that support an internal

DSI adapter. At the time of publication, compatible products include:

Equipment Shipped with the Adapter

When you unpack the adapter, verify that the package includes:

User-Supplied Equipment

To install and configure the adapter, you must supply:

Compatible Products

• PowerFlex 4 drives (when used with DSI External Comms Kit)

• PowerFlex 4M drives

(1)

(when used with DSI External Comms Kit)

(1)

The 22-COMM-B adapter must have firmware version 1.003 (or later) to be compatible with

PowerFlex 4M drives.

• PowerFlex 40 drives

• PowerFlex 400 drives

Required Equipment

❑ One adapter

❑ One 15.24 cm (6 in.) Internal Interface cable

❑ One 3-pin linear plug (plugged into the adapter socket)

❑ One PowerFlex 4-Class DSI (Drive Serial Interface) Network

Communications Adapter Installation Instructions (publication

22COMM-IN002)

❑ A small flathead screwdriver

❑ A shielded, twisted wire pair to connect the adapter to the network

❑ A configuration tool, such as:

– PowerFlex 4-Class HIM (22-HIM-A3 or 22-HIM-C2S) – required

to access adapter parameters when not using DriveExplorer or

DriveExecutive software

– DriveExplorer software (version 3.01 or later)

– DriveExecutive stand-alone software (version 3.01 or later) or

bundled with the DriveTools SP suite (version 1.01 or later)

– Third-party network configuration software

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Keine Kommentare

Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Bedienungsanleitung Seite 11