Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Bedienungsanleitung PDF herunterladen (Seite 12)

Publication 20P-IN004B-EN-P

Step 5C: Remove the 115V AC to 24V DC Converter Board

If the optional 115V AC to 24V DC converter board is not installed, continue

with Step 6: Remove the Existing Control Board

on page 13.

1. Remove the plug-in I/O terminal blocks.

2. Remove the two screws that secure the I/O converter board to the stand-offs

on the control board and remove the converter board.

3. Remove the two stand-offs and washers that support the converter board on

the control board.

Remove two screws

Tightening torque:

1.0 N•m (8.9 lb•in)

Remove two stand-offs

Tightening torque:

1.0 N•m (8.9 lb•in)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Bedienungsanleitung Seite 12