Rockwell-automation 20L PowerFlex 700L Frame 2 DC Bus Bar Conversion K Bedienungsanleitung PDF herunterladen (Seite 6)

6 PowerFlex® 700L Frame 2 DC Bus Bar Conversion Kit SK-L1-DCBS1-F2

Step 3: Assembling the Kit

Parts

1. Assemble the DC- bus bar to the drive using the two (2) new M5 x 16

mm (0.63 in.) long SEMS screws from the kit, placing the ring lug

between the DC- bus bar and screw head. Tighten to the torque shown in

the drawing. Apply a thin stripe of Torque Seal from each M5 screw

head to the bus bar.

2. Assemble the DC+ bus bar to the drive using the two (2) new M5 x 16

mm (0.63 in.) long SEMS screws from the kit, placing the ring lug

between the DC+ bus bar and screw head. Tighten to the torque shown in

the drawing. Apply a thin stripe of Torque Seal from each M5 screw

head to the bus bar.

GND

SHLD

POWER

STS

SHLD

➊

➌

➋

Screw M4 x 12 mm Long

4x (4.0 N-m / 35 lb.-in.)

Screw M5 x 16 mm Long

4x (5.8 N-m / 51 lb.-in.)

Screw M5 x

16 mm Long

DC Bus Bar

Ring Lug

DETAIL SECTION

THROUGH BUS BAR

1 2 3 4 5 6 7 8

Keine Kommentare

Rockwell-automation 20L PowerFlex 700L Frame 2 DC Bus Bar Conversion K Bedienungsanleitung Seite 6