Rockwell-automation 2094 LIM Remove/Replace Internal Components Bedienungsanleitung PDF herunterladen (Seite 14)

Publication 2094-IN009C-EN-P — April 2008

14 Removing and Replacing the Line Interface Module Internal Components

2. Determine your ease of access to the cooling fan.

3. Remove the four phillips screws that hold the finger guard and

fan in place.

4. Set the finger guard aside.

5. Pull the fan away from the LIM module and disconnect the

power cord.

6. Go to Replace the Cooling Fan on page 15

If access to the fan is Then

Limited (insufficient clearance to access

fan screws)

Remove the LIM module from the cabinet

(1)

before proceeding to step 3.

(1)

For drive system component removal/replacement procedures, refer to the appropriate servo-drive

user manual in Additional Resources on page 21

Not limited (adequate clearance to

access fan screws)

Go to step 3

2094-BL02

Line Interface Module

2094-BL02

Line Interface Module

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Keine Kommentare

Rockwell-automation 2094 LIM Remove/Replace Internal Components Bedienungsanleitung Seite 14