Rockwell-automation 20-COMM-B BACnet MS/TP Adapter Bedienungsanleitung PDF herunterladen (Seite 3)

Summary of Changes

The information below summarizes the changes made to this manual

since its last release (May 2006):

The information below summarizes the changes made to this manual

since its last release (April 2006):

Description of Changes Page(s)

In the “Quick Start” section:

• In Step 4, removed connecting the adapter to the network.

• In Step 5, added two new sub-steps (B and C).

• Added a new Step 6 “Connect the adapter to the network.”

• Incremented old Steps 6 and 7 to Steps 7 to 8.

1-6

Reorganized Chapter 2:

• Moved the “Connecting the Adapter to the Drive” section after the

“Commissioning the Adapter” section.

• Moved the “Applying Power” section after the “Connecting the Adapter to

the Drive” section.

• In the “Applying Power” section, added three new subsections:

– “Start-Up Status Indications”

– “Verifying/Setting Key Adapter Parameters”

– “Configuring/Verifying Key Drive Parameters.”

• Moved the “Connecting the Drive/Adapter to the Network” section to the

end of the chapter.

Chapter

In Chapter 3, moved the “Setting the Device Instance Number” section after

the “Using the PowerFlex 7-Class HIM” section. Included additional

information to the “Setting the Device Instance Number” section.

3-3

Added new Appendix D “Routing Capability for Networked Drives.” D-1

Description of Changes Page(s)

In the Features section — first bullet, removed text “... and can be used with

the kit’s optional I/O board.” Also, added an Important statement regarding

this information.

1-2

In the Viewing the Adapter Configuration table, added a third bullet in the

Parameter 07 - [Baud Rate Act] row.

3-8

For Parameter 05 - [Flt Cfg Ref], corrected its detail information from being a

bit parameter to a numeric parameter.

B-2

1 2 3 4 5 6 7 8 ... 75 76

Keine Kommentare

Rockwell-automation 20-COMM-B BACnet MS/TP Adapter Bedienungsanleitung Seite 3