Rockwell-automation 1799-D12G12GL 12 Input/12 Output Discrete Embedded Bedienungsanleitung PDF herunterladen (Seite 13)

13 12 Input/12 Output Discrete Embedded TTL I/O Module with Pulse Width Modulation and DeviceLogix

Publication 1799-IN008A-EN-P - July 2005

Configure DeviceLogix Parameters

Use the Function Block Editor supplied with RSNetWorx for DeviceNet software to

configure DeviceLogix parameters.

Configure the DeviceLogix parameters listed in the following table:

Output Fault Value Controls the value that outputs will have when the output

fault state is set to ‘use fault value.’

Consumed I/O Assembly Lets you select size of consumed data.

Network Status Override Lets local logic override output behavior when the module is

not online.

Comm Status Override Allows local logic to override output behavior when

communications is faulted or idled.

Quick Start Disables Autobaud, decreasing startup time.

TIP

For more information on using the Function Block Editor, refer to

the DeviceLogix User Manual, publication ACIG-UM001, as well

as the online help supplied with RSNetWorx for DeviceNet

software.

Parameter Selection

Function Blocks Supported Boolean

Latches

Timers

Counters

Maximum Number of Function Blocks in a

Configuration

Function Block Processing Time 2 msec/24 blocks

4 msec/28 blocks

6 msec/72 blocks

Network Input Bits 32

Network Output Bits 16

Parameter Description

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Rockwell-automation 1799-D12G12GL 12 Input/12 Output Discrete Embedded Bedienungsanleitung Seite 13