Rockwell-automation 1798-IE4 FlexArmor Analog Input Module Bedienungsanleitung PDF herunterladen (Seite 1)

Publication 1798-IN007A-EN-P - April 2002

Installation Instructions

FlexArmor Analog Input Module

Catalog Number 1798-IE4

The FlexArmor I/O module (Cat. No. 1798-IE4) mounts in a

FlexArmor Baseplate. Use compatible sealed cordsets to connect all

field side wiring. All cordsets must be shielded to achieve proper

noise immunity.

The 1798-IE4 module provides connections for up to 4 single ended

non-isolated inputs. This module has four 12 mm connectors

configured for analog input. A diagnostic feature for this module

includes sensor power short-circuit detection. The inputs can be

either voltage or current.

Package Contents

Your package contains one FlexArmor 1798-IE4 module and these

installation instructions. (Note: Baseplates and other components are

ordered and shipped separately.)

42999

1 2 3 4 5 6 7 8

Publication 1798-IN007A-EN-P - April 2002Installation InstructionsFlexArmor Analog Input Module Catalog Number 1798-IE4The FlexArmor I/O module (Cat.

2 FlexArmor Analog Input Module Publication 1798-IN007A-EN-P - April 2002Important User InformationBecause of the variety of uses for the produ

Seite 3

FlexArmor Analog Input Module 3Publication 1798-IN007A-EN-P - April 2002IMPORTANTIdentifies information that is critical for successful applic

4 FlexArmor Analog Input Module Publication 1798-IN007A-EN-P - April 2002Related Publications• For DeviceNet software configuration information

Seite 5

FlexArmor Analog Input Module 5Publication 1798-IN007A-EN-P - April 20024. Screw down the module retaining screws to ensure IP67 compliance. C

6 FlexArmor Analog Input Module Publication 1798-IN007A-EN-P - April 2002Troubleshooting with the IndicatorsThe following table describes the s

Seite 7

FlexArmor Analog Input Module 7Publication 1798-IN007A-EN-P - April 2002Specifications - 1798-IE4 Analog Input Module (continued)Thermal Dissi

Seite 8

Keine Kommentare

Rockwell-automation 1798-IE4 FlexArmor Analog Input Module Bedienungsanleitung Seite 1