Rockwell-automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connecto Bedienungsanleitung PDF herunterladen (Seite 6)

6 FLEX Ex Bus Isolator and Flexbus Connector

Publication

1797-5.13 - June 2010

1797-CEC Module Installation

The 1797-CEC module mounts on a DIN rail. It connects to an adapter or

another FLEX I/O module. If using this module with FLEX I/O modules,

do not mount between FLEX I/O modules. Mount the 1797-CEC module to

the right of FLEX I/O modules. Follow these steps to mount this module.

1. Remove the cover plug (if used) in the male connector of the unit to

which you are connecting this module.

2. Position the module on the 35 x 7.5 mm DIN rail A (A-B pt. no.

199-DR1).

3. Rotate the module onto the DIN rail with the top of the rail hooked

under the lip on the rear of the module.

4. Press down to lock the module on the DIN rail.

1797-CEC

42642

41377

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Keine Kommentare

Rockwell-automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connecto Bedienungsanleitung Seite 6