Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Bedienungsanleitung PDF herunterladen (Seite 25)

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 23

Set Up in the Studio 5000 Logix Designer Application Chapter 2

4. Set the RPI for the linking device.

5. Click OK to add the linking device to the I/O tree.

RSNetWorx for ControlNet Configuration

See the RSNetWorx for ControlNet Getting Results Guide, publication CNET-

GR001, for more details.

Follow these steps to configure the ControlNet network.

1. Launch RSNetWorx™ for ControlNet and create a file.

2. Click the Online button.

The Browse for Network window appears with the drivers you have

installed on your system.

IMPORTANT

The recommended RPI is 1/2 the macrocycle time. Calculate the macrocycle by

calculating the total response time of all field devices on the segment and then

add 100

…200 ms for class 2 (DTM message) data. If the RPI is too low, class 1

data (PVs and status) does not update each cycle, and class 2 data responses

can be slow.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 103 104

Keine Kommentare

Rockwell-automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATI Bedienungsanleitung Seite 25