Rockwell-automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I Bedienungsanleitung PDF herunterladen (Seite 25)

Publication 1769-UM008A-EN-P - November 2001

Installation and Wiring 3-3

Hazardous Location Considerations

This equipment is suitable for use in Class I, Division 2, Groups A, B,

C, D or non-hazardous locations only. The following WARNING

statement applies to use in hazardous locations.

Prevent Electrostatic Discharge

WARNING

EXPLOSION HAZARD

• Substitution of components may impair suitability

for Class I, Division 2.

• Do not replace components or disconnect

equipment unless power has been switched off

or the area is known to be non-hazardous.

• Do not connect or disconnect components unless

power has been switched off or the area is

known to be non-hazardous.

• This product must be installed in an enclosure.

• All wiring must comply with N.E.C. article

501-4(b)

ATTENTION

Electrostatic discharge can damage integrated circuits

or semiconductors if you touch bus connector pins

or the terminal block. Follow these guidelines when

you handle the module:

• Touch a grounded object to discharge static

potential.

• Wear an approved wrist-strap grounding device.

• Do not touch the bus connector or connector

pins.

• Do not touch circuit components inside the

module.

• If available, use a static-safe work station.

• When not in use, keep the module in its

static-shield box.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 103 104

Keine Kommentare

Rockwell-automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I Bedienungsanleitung Seite 25