Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module Bedienungsanleitung PDF herunterladen (Seite 9)

ControlLogix ControlNet Bridge Module 9

Publication

1756-IN602A-EN-P - November 2005

Set the Module’s Network Address Switches

Use your fingers or a small screwdriver to set the module’s network

address switches. For modules in a standalone chassis, you must

specify a unique ControlNet network address. You can select an

address of 01 to 99 for modules in a standalone chassis. Note that 00

is an invalid ControlNet address.

Prepare the Chassis for Module Installation

Before you install the 1756-CN2 module, you must install and connect

a ControlLogix chassis and power supply. A 4-slot chassis with a

power supply is shown below.

side of module

front of module

top of module

This module’s network

address is 23.

Chassis

Power

Supply

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Keine Kommentare

Rockwell-automation 1756-CN2R ControlLogix ControlNet Interface Module Bedienungsanleitung Seite 9