Rockwell-automation 1746-NI8 SLC 500 Analog Input Modules User Manual Bedienungsanleitung PDF herunterladen (Seite 27)

3–6

Installation and Wiring

Publication

17466.8 - April 1997

Module Removal Procedure

1. Press the releases at the top and bottom of the module and slide

the module out of the chassis slot.

2. Cover all unused slots with the Card Slot Filler, Catalog Number

1746-N2.

The 1746-NI8 module contains an 18-position, removable terminal

block. The terminal pin-out is shown below.

ATTENTION: Disconnect power to the SLC before

attempting to install, remove, or wire the removable

terminal wiring block.

To avoid cracking the removable terminal block,

alternate the removal of the slotted terminal block

release screws.

Terminal Block

(Terminal Block Spare Part Catalog Number 1746RT25G)

Shield

Channel 0 (+)

Channel 1 (+)

Channel 2 (+)

Channel 3 (+)

Channel 4 (+)

Channel 5 (+)

Channel 6 (+)

Channel 7 (+)

Channel 0 (-)

Channel 1 (-)

Channel 2 (-)

Channel 3 (-)

Channel 4 (-)

Channel 5 (-)

Channel 6 (-)

Channel 7 (-)

Terminal Wiring

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 90 91

Keine Kommentare

Rockwell-automation 1746-NI8 SLC 500 Analog Input Modules User Manual Bedienungsanleitung Seite 27