Rockwell-automation 1738-AENTR Armorpoint 2 Port Enet Adapter Bedienungsanleitung PDF herunterladen (Seite 13)

ArmorPoint I/O 2-Port EtherNet/IP Adapter, Series A 13

Publication

1738-IN028B-EN-E - February 2010

Network Status

Status Description Recommended action

Off Device not initialized. Device does

not have an IP address.

Apply power to device, verify IP

address, and correct, as needed.

Green CIP connections present. Device

online and has an IP address, and CIP

connections are established.

None.

Flashing

green

No CIP connections present. Device

has an IP address, but no CIP

connections are established.

None.

Flashing

red/green

Device is in self-test. None.

Flashing red One or more CIP connections have

timed out.

Check for I/O module failure and

controller operation, and correct,

as needed.

Red Duplicate IP address detected. Verify IP address setting and

correct, as needed.

System Power

Status Description Recommended action

Off Not active; adapter power is off or

DC-DC converter problem is present.

1. Verify power is on, and apply

power if needed.

2. Verify backplane power not

exceeded, and correct as needed.

3. Replace device.

Green System power is on; DC-DC

converter output is active (5V).

None.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Rockwell-automation 1738-AENTR Armorpoint 2 Port Enet Adapter Bedienungsanleitung Seite 13